Huawei SmartLi 2.0 User Manual page 21

Hide thumbs Also See for SmartLi 2.0:
Table of Contents

Advertisement

SmartLi 2.0
User Manual
There is a risk of explosion if a battery is replaced with an incorrect model.
Battery Installation
Before installing batteries, observe the following safety precautions:
Battery Short Circuit
Battery short circuits can generate high instantaneous current and release a great
amount of energy, which may cause equipment damage or personal injury.
To avoid battery short circuit, do not maintain batteries with power on.
Issue 09 (2022-01-30)
WARNING
Wear goggles, rubber gloves, and protective clothing to avoid damage caused
by electrolyte in the case of electrolyte overflow. If a battery overflows,
protect the skin or eyes from the leaking liquid. If the skin or eyes come in
contact with the leaking liquid, wash it immediately with clean water and go
to the hospital for medical treatment.
Use dedicated insulated tools.
Move batteries in the required direction. Do not place a battery upside down,
tilt it, or bump it with other objects.
Use batteries of specified models. Using batteries of other models may
damage the batteries.
A battery can be replaced only with a battery of the same or similar model
recommended by the manufacturer.
Dispose of waste batteries in accordance with local laws and regulations. Do
not dispose of batteries as household waste. If a battery is disposed of
improperly, it may explode.
The site must be equipped with qualified fire extinguishing facilities, such as
firefighting sands and liquid carbon dioxide fire extinguishers.
Install batteries in a well-ventilated, dry, and cool environment that is far
away from heat sources, flammable materials, moisture, extensive infrared
radiation, organic solvents, and corrosive gases. Take fire prevention
measures.
Place and secure batteries horizontally.
Keep the lithium battery loop disconnected during installation and
maintenance.
Note the polarities when installing batteries. Do not short-circuit the positive
and negative poles of the same battery or battery string. Otherwise, the
battery may be short-circuited.
Check battery connections periodically, ensuring that all screws are securely
tightened.
When installing batteries, do not place installation tools on the batteries.
D ANGER
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
11

Advertisement

Table of Contents
loading

Table of Contents