Installation Environment Requirements - Huawei SmartLi 2.0 User Manual

SmartLi 2.0
User Manual
ESD
The static electricity generated by human bodies may damage the electrostatic-
sensitive components on boards, for example, the large-scale integrated (LSI)
circuits.
●
●
●
Figure 1-1 Wearing an ESD wrist strap

1.4 Installation Environment Requirements

●
●
●
●
●
●
Issue 09 (2022-01-30)
NO TICE
Wear ESD gloves or a well-grounded ESD wrist strap when touching the
device or handling boards or application-specific integrated circuits (ASICs).
When holding a board, hold its edge without touching any components. Do
not touch the components with your bare hands.
Package boards with ESD packaging materials before storing or transporting
them.
To prevent fire due to high temperature, ensure that the ventilation vents or
heat dissipation system are not blocked when the equipment is running.
Install the equipment in an area far away from liquids. Do not install it under
areas prone to condensation, such as under water pipes and air exhaust vents,
or areas prone to water leakage, such as air conditioner vents, ventilation
vents, or feeder windows of the equipment room. Ensure that no liquid enters
the equipment to prevent faults or short circuits.
If any liquid is detected inside the equipment, immediately disconnect the
power supply and contact the administrator.
Do not expose the equipment to flammable or explosive gas or smoke. Do
not perform any operation on the equipment in such environments.
Ensure that the equipment room provides good heat insulation, and the walls
and floor are dampproof.
Install a rat guard at the door of the equipment room.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Information
6