Huawei SmartLi 2.0 User Manual page 44

SmartLi 2.0
User Manual
Table 3-4 Qualification standard for recharge
Lithium Battery
Model
ESM-6440P1
----End
Recharge with a Battery Charger/Discharger
Step 1 Identify the battery module qualified for recharge.
Step 2 Install cables between the portable battery charger/discharger and the battery
module.
Issue 09 (2022-01-30)
Required
Recharge End
Voltage
≥ 66.6 V
NO TE
● If the battery is qualified after recharge, remove cables, place it in the original packing
case, and update the latest charge time and next recharge time on the recharge label of
the original packing case. The battery should be used as soon as possible.
● If the battery is not qualified after recharge, recharge it again. If the battery is still not
qualified, dispose of it.
Copyright © Huawei Technologies Co., Ltd.
3 Transportation and Storage
Voltage
Requirement
After Staying in
Open-Circuit
State for 10
Minutes
Subsequent to
Recharge
≥ 64 V
Method for
Measuring
Battery Voltage
· Use a voltmeter
to measure the
voltage between
the positive and
negative
terminals of the
battery.
· View the battery
voltage displayed
on the LCD.
34