Huawei SmartLi 2.0 User Manual page 101

SmartLi 2.0
User Manual
Default
User
Procedure
Step 1 Connect the network port of the PC to the FE port of the monitoring interface unit
using a network cable
Step 2 Open the browser and choose Tools > Internet Options.
Step 3 Click the Advanced tab, check that Use TLS 1.0 and Use TLS 1.1 are selected, and
click OK.
Figure 5-1 Settings in the Internet Options dialog box
Issue 09 (2022-01-30)
Preset Password
WebUI
NO TE
● If an incorrect password is entered five consecutive times, the account will be logged out
for 5 minutes.
● After a user logs in to the WebUI, if another user logs in with the same user name, the
current account will be logged out.
● Change the password after your first login to prevent unauthorized access. You can
change the password over the user management menu on the configuration page.
Copyright © Huawei Technologies Co., Ltd.
User Rights
Changeme Browses system running information,
exports system information (including
historical alarms, logs, and electronic
labels) except fault data, and clears
faults. Other control and maintenance
functions that may affect system
operation are unavailable to this role
and parameters cannot be set.
5 User Interface
91