Huawei SmartLi 2.0 User Manual page 91

SmartLi 2.0
User Manual
Step 2 Use a hammer drill to drill holes for installing expansion bolts and then install
expansion sleeves in the holes.
Step 3 Open the front door and remove the rear door panels. (Keep them properly to
avoid scratches.)
Step 4 Install the rear conversion brackets and antiseismic kits.
Figure 4-56 Installing conversion brackets and antiseismic kits
(A) Spacing of 15 round holes
(C) Spacing of 17 round holes
Step 5 Remove the supports from the front door and rear cover.
Issue 09 (2022-01-30) Copyright © Huawei Technologies Co., Ltd.
(B) Spacing of 11 round holes
4 Installation
81