Wheel Change - Mercedes-Benz GLB Owner's Manual

534 Wheels and tyres
Restart the tyre pressure loss warning system in
the following situations:
The tyre pressure has changed.
R
The wheels or tyres have been changed or
R
newly fitted.
On-board computer:
Service Tyres
4 5
Swipe downwards on Touch Control on the
#
left-hand side of the steering wheel.
The Run Flat Indicator activeRestart
is shown in the multifunction display.
Restart the tyre pressure loss warning system in
the following situations:
The tyre pressure has changed.
R
The wheels or tyres have been changed or
R
newly fitted.
To begin restart, press Touch Control on the
#
left-hand side of the steering wheel.
The Tyre pressure now OK?
shown in the multifunction display.
Select Yes.
#
To confirm restart, press Touch Control on
#
the left-hand side of the steering wheel.
The Run Flat Indicator restarted
shown in the multifunction display.
After you have driven for a few minutes, the
tyre pressure loss warning system monitors
the set tyre pressures of all the tyres.
Be sure to also observe the following further
related subjects:
Notes on tyre pressure (
R
message

Wheel change

Notes on selecting, fitting and replacing
tyres
Mercedes-AMG vehicles: observe the notes in
the Supplement. Otherwise, you may fail to rec‐
ognise dangers.
You can ask for information regarding permitted
wheel/tyre combinations at a Mercedes-Benz
message is
Service Centre.
& WARNING Risk of accident due to incor‐
message is
If wheels and tyres of the wrong size are
used, the wheel brakes or wheel suspension
components may become damaged.
Always replace wheels and tyres with
#
those that fulfil the specifications of the
original part.
When replacing wheels, make sure to fit the
page 525)
/
correct:
Designation
R
Type
R
When replacing tyres, make sure to fit the
correct:
Designation
R
Manufacturer
R
Type
R
rect dimensions of wheels and tyres