Mercedes-Benz GLB Owner's Manual page 531

528 Wheels and tyres
System limits
The system may be impaired or may not function
in the following situations:
the tyre pressure has been set incorrectly
R
there is a sudden pressure loss caused, for
R
example, by a foreign object penetrating the
tyre
there is a malfunction caused by another
R
radio signal source
Be sure to also pay attention to the following
related topic:
notes on tyre pressure (
/
R
Checking the tyre pressure with the tyre
pressure monitoring system
Requirements:
The ignition is switched on.
R
On-board computer:
Service Tyres
4 5
One of the following displays appears:
Current tyre pressure and tyre temperature
R
of the individual wheels:
Tyre pressures will be displayed after a few
R
minutes of driving
Tyre pressure monitor
R
page 525)
process of the system is not yet complete.
The tyre pressures are already being moni‐
tored.
Compare the tyre pressure with the recom‐
#
mended tyre pressure for the current operat‐
ing condition (
notes on tyre temperature (
% The values displayed in the multifunction dis‐
play may deviate from those of the tyre pres‐
sure gauge as they refer to sea level. At high
altitudes, the tyre pressure values indicated
active: the teach-in
page 526). Observe the
/
page 525).
/
by a pressure gauge are higher than those
shown by the on-board computer. In this
case, do not reduce the tyre pressure.
Make sure to observe the following further rela‐
ted subject:
Notes on tyre pressure (
/
R
Restarting the tyre pressure monitoring sys‐
tem
Requirements:
The recommended tyre pressure is correctly
R
set for the respective operating status on
each of the four wheels (
/
Restart the tyre pressure monitoring system in
the following situations:
The tyre pressure has changed.
R
The wheels or tyres have been changed or
R
newly fitted.
page 525)
page 525).