Mercedes-Benz GLB Owner's Manual page 122

To move the driver's head restraint back‐
#
wards: press release knob
head restraint backwards.
Adjusting the head restraints of the rear
seats mechanically
To raise: pull the head restraint up.
#
To lower: press the release knob
#
2 and push the direction of the arrow and push the head
restraint down.
If the centre seat on the second row of
#
seats is not occupied: press the head
restraint down all the way.
Vehicles with a third row of seats
The head restraints on the third row of seats
have a usage and non-usage position. The usage
position is the extended, top position in which
the head restraint engages; the non-usage posi‐
tion is the bottom, retracted position of the head
restraint. If the seats on the third row of seats
are being used, the head restraint must be in the
top, engaged usage position.
If the third row of seats is occupied: move
#
the head restraints to the very top and have
them engage there.
If the third row of seats is not occupied:
#
move the head restraints to the very bottom.
Fitting/removing the rear seat head
1 in the
restraints
Removing
Release the rear seat backrest and fold it for‐
#
wards slightly (
Pull the head restraint upwards as far as it
#
will go.
Seats and stowing 119
page 129).
/