Mercedes-Benz GLB Owner's Manual page 561

558 Technical data
cations explicitly prescribed for the
service intervals.
Do not alter the engine oil or oil filter in
#
order to achieve longer change intervals
than prescribed.
Do not use additives.
#
Have the engine oil renewed at regular
#
intervals.
Mercedes-Benz recommends that you have the
oil change carried out at a qualified specialist
workshop.
Only Mercedes-Benz approved engine oils may
be used in Mercedes-Benz engines.
Further information on engine oil and oil filters is
available at the following locations:
in the Mercedes-Benz Specifications for
R
Operating Fluids by entering the designation
at https://bevo.mercedes-benz.com
-
in the Mercedes-Benz BeVo app
-
at a qualified specialist workshop
R
Petrol engines: for certain countries, different
engine oils can be used in conjunction with
reduced maintenance intervals.
% Further information on different engine oils
can be obtained at a qualified specialist
workshop.
Quality and capacity of engine oil
MB-Freigabe or MB-Approval
Petrol engines Engine oil specifica‐
All models 229.51, 229.52,
MB-Freigabe or MB-Approval
Diesel engines Engine oil specifica‐
All models 228.51, 229.31,
229.51, 229.52,
* recommended for lowest possible fuel con‐
sumption (lowest SAE viscosity class in each
case; observe possible restrictions of the
approved SAE viscosity classes)
To achieve the lowest possible fuel consumption,
it is recommended to use the engine oil specifi‐
cations marked in the table for the lowest SAE
viscosity class. Possible restrictions of the
approved SAE viscosity classes must be
observed.
% If the engine oils listed in the table are not
tions
available, you may add a maximum of
1.0 litre of the following engine oils once
only.
229.61
Engine oils for one-time filling only in exceptional
229.71*
cases:
petrol engines: MB-Freigabe or MB-Approval
R
229.31 or ACEA C3
tions
diesel engines: MB-Freigabe or MB-Approval
R
ACEA C3
The following values refer to an oil change,
229.61
including the oil filter.
229.71*