Mercedes-Benz GLB Owner's Manual page 169

166 Light and sight
Tail lamps
1 Turn signal light: PY 21 W bulb
2 Reversing light: W 16 W bulb
Changing the front bulbs (vehicles with halo‐
gen headlamps)
Fitting/removing the cover on the front
wheel arch
Requirements:
The lighting system is switched off.
R
The appropriate front wheel is turned
R
inwards.
To remove: turn cover 1 to the left and
#
remove it from the wheel arch liner.
To install: insert cover 1
#
arch liner and turn it to the right until it
engages.
Replacing light sources in the halogen head‐
lamp
Requirements:
Low beam: an H7 55 W light source is avail‐
R
able.
High beam: an H7 55 W light source is avail‐
R
able.
into the wheel