Table of Contents
Advertisement
138 Seats and stowing
Partitioning net with load compartment enlarge‐
ment
To attach: Attach the partition net to the
#
brackets
1
on the left and right of the roof
lining.
Without load compartment enlargement:
#
attach the hooks
2
to the tie-down eyes
on the left and right in such a way that the
hooks
2
point backwards.
With load compartment enlargement: attach
#
the hooks
2
to the tie-down eyes
left and right in such a way that the hooks
2
point to the door.
Pull on the loose ends of the lashing straps
#
until the partitioning net is tight.
3
To remove: turn the buckle of the tie-down
#
strap in the direction of arrow 5.
Slide the loose end of the tie-down strap into
#
3
on the
the buckle in the direction of arrow
the tie-down straps are loose.
Remove the hooks
#
eyes
3
on the left and right.
Remove the partition net from the holders
#
1
on the roof lining on the left and right.
Overview of the tie-down eyes
Observe the notes on loading the vehicle
(
page 126).
/
* NOTE Damage to the release loops due
to the attachment of objects
The release loops of the seat backrests in
the rear may be damaged due to the attach‐
ment of objects.
Only attach objects to the tie-down
#
eyes.
4
until
2
from the tie-down
Hide quick links:
Advertisement
Table of Contents
