Diagnostics Connection - Mercedes-Benz GLB Owner's Manual

Table of Contents

Advertisement

4.
Hradec nad Moravicí
City
5.
05.05.2015
Date
Signed by
Director of Quality
TIREFIT kit
Copy and translation of the original declaration
of conformity:
EC declaration of conformity
In accordance with EC Directive 2006/42/EC
We hereby declare that the product
Product designation: Daimler electric air pump
Model designation: 0851ve, DT/UW 200046
MB part no.: A 000 583 8200
complies with the following relevant regulations:
2004/108/EC
Applied harmonised standards, in particular:
DIN EN 55014-1
DIN EN 55014-2:2009-06
Manufacturer: Dunlop Tech GmbH
Address: Birkenhainerstrasse 77, 63450 Hanau,
Germany
Authorised representative: IMS dept.
Date: June 2015
Signature: IMS-AM, IMS-AE-L

Diagnostics connection

The diagnostics connection is only intended for
the connection of diagnostic devices at a quali‐
fied specialist workshop.
& WARNING Risk of accident due to con‐
necting devices to the diagnostics con‐
nection
If you connect equipment to a diagnostics
connection in the vehicle, it may affect the
operation of vehicle systems.
General notes
As a result, the operating safety of the vehi‐
cle could be affected.
Only connect the vehicle diagnostics
#
connection to devices which have been
tested with regard to their use and are
considered safe.
& WARNING Risk of accident due to
objects in the driver's footwell
Objects in the driver's footwell may impede
pedal travel or block a depressed pedal.
This jeopardises the operating and road
safety of the vehicle.
Stow all objects in the vehicle securely
#
so that they cannot get into the driver's
footwell.
Always fit the floor mats securely and
#
as prescribed in order to ensure that
there is always sufficient room for the
pedals.
Do not use loose floor mats and do not
#
place floor mats on top of one another.
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents