Table of Contents
Advertisement
546 Wheels and tyres
Remove sticker
1
from the tyre inflation
#
compressor housing and affix it to the instru‐
ment cluster within the driver's field of
vision.
Pull filler hose
2
and plug
#
inflation compressor housing.
Insert plug
8
of filler hose
#
on the tyre inflation compressor and then
turn it until plug
8
engages.
Unscrew the cap from the valve on the emer‐
#
gency spare wheel.
Screw union nut
3
of filler hose
#
valve.
Make sure on and off switch
#
inflation compressor is set to 0.
Insert plug
4
in a socket in your vehicle.
#
Cigarette lighter socket: (
/
R
12 V socket: (
page 147)
/
R
Observe the notes on the cigarette lighter:
R
(
page 147)
/
Observe the notes on sockets: (
R
Turn the key to position 1 in the ignition
#
lock.
4
out of the tyre
Press on and off switch
#
tion compressor to I.
The tyre inflation compressor is switched on.
2
in the socket
The tyre is inflated. The tyre pressure is
shown on manometer 6.
Pump the tyre to the specified tyre pressure.
#
The specified tyre pressure is stated on the
label of the emergency spare wheel.
2
onto the
When the specified tyre pressure has been
#
reached, press on and off switch
5
of the tyre
tyre inflation compressor to 0.
The tyre inflation compressor is switched off.
Turn the key to position g in the ignition
#
page 147)
lock.
If the tyre pressure is higher than the speci‐
#
fied pressure, press pressure release valve
button
been reached.
page 147)
/
Unscrew union nut
#
the valve.
Screw the valve cap of the emergency spare
#
wheel onto the valve again.
5
on the tyre infla‐
5
on the
7
until the correct tyre pressure has
3
of filler hose
2
from
Hide quick links:
Advertisement
Table of Contents
