Mercedes-Benz GLB Owner's Manual page 243

240 Driving and parking
The transmission is in position h.
R
Variable limiter
The vehicle has been started.
R
The variable limiter is selected.
R
Switching between cruise control and the
variable limiter
To select cruise control: press rocker
#
switch 1 up.
To select the variable limiter: press rocker
#
switch 1 down.
% Vehicles with Active Distance Assist
DISTRONIC: the variable limiter is selected
by a different button ( page 245).
/
Activating cruise control or the variable lim‐
iter
Press rocker switch 2 up (SET+) or down
#
(SET-).
The current driven speed is stored and the
vehicle maintains this speed (cruise control)
or does not exceed it (limiter).
or
Press rocker switch 3 up (RES).
#
The last stored speed is called up and the
vehicle maintains this speed (cruise control)
or does not exceed it (variable limiter).
If the last stored speed has previously been
deleted, the currently driven speed is stored.
% When you switch off the vehicle, the last
speed stored is cleared.
When you activate cruise control or Active
Distance Assist DISTRONIC, the last speed
stored for the variable limiter is cleared.
Increasing/decreasing the stored speed
Press rocker switch 2 up (SET+) or down
#
(SET-) to the pressure point.
The stored speed is increased or reduced by
1 km/h.
or
Press rocker switch 2 up (SET+) or down
#
(SET-) to the pressure point and hold.
The stored speed is increased or reduced in
increments of 1 km/h.
or
Press rocker switch 2 up (SET+) or down
#
(SET-) beyond the pressure point.
The stored speed is increased or reduced by
10 km/h.
or
Press rocker switch 2 up (SET+) or down
#
(SET-) and hold beyond the pressure point.
The stored speed is increased or reduced in
increments of 10 km/h.