Unpacking The Elite Xl 20Ppm - GCC Technologies Elite XL-20/600 User Manual

Unpacking the Elite XL 20ppm

Warning: The printer must be carried by two people. It weighs approximately 60
pounds unpacked (approximately 27 kilograms).
Note: Save the packing materials inside the shipping box and put the box in a safe
place; you will be able to repack the printer should you need to move it again.
1.
2.
3.
4.
5.
6.
If any of these items
are missing, contact
your dealer or GCC
Technical Support
(781-276-8620)
immediately.
You will need to
provide a cable to
connect your com-
puter or network to
the printer.
1 - 6 • Introduction and Installation
Unlock and remove the four locking handles by pulling the tab.
Lift off the top of the box, and take out the printer.
Take the printer out of the plastic bag.
Remove the three pieces of tape from the top of the printer.
Take the documentation and CD-ROM out of the plastic bag.
Check that you have all of the following:
Universal paper
cassette
Installation
Guide
Elite XL 20ppm
printer
AC power
cord
Configuration
page
Toner cartridge
(in box)
Elite XL 20ppm
CD-ROM