GCC Technologies Elite XL-20/600 User Manual page 67

mend that you do not choose to print a test page yet. You will print a test page
when the installation is complete.
• Have your Windows 95 CD or disks ready, and click Finish.
• The software installation will now commence. At one point, a dialog box will
ask you to insert either the Windows 95 CD-ROM or the Windows 95 floppy
disk that contains the printer driver. The kind of disk you need depends on
whether Windows 95 was originally installed with a CD or floppy disks.
- If you are prompted to insert a CD, remove the Elite XL 20ppm CD-ROM,
insert the Windows 95 CD, and click OK.
- If you are prompted to insert a floppy disk, insert the appropriate Windows
95 floppy disk into the drive and click OK.
If you do not have Windows 95 on disk, or the installation process halts
because a file cannot be found, go to the section "Solutions to possible soft-
ware installation problems" immediately after these numbered steps.
16. When the installation is complete, you will see the Printers folder, includ-
ing an icon for the newly installed printer.
• Using the right mouse button, click on the printer's icon. Select Properties from
the pop-up menu.
17. You will see the printer's Properties dialog box.
• The next steps are for network printers only. If your printer is set up for local
operation go to step 21.
18. Click the Capture Settings tab at the top of the dialog box.
• 4 - 9