Supported Network Protocols - GCC Technologies Elite XL-20/600 User Manual

Supported network protocols

• EtherTalk - EtherTalk is Apple Computer's name for the AppleTalk network
protocol running over Ethernet cabling.
• NetWare - NetWare is Novell's system for Ethernet connection.
• TCP/IP - TCP/IP is a networking protocol used by various vendors of network
software. It is used by Windows 95, NT, and UNIX, among others.
Additional information about these protocols is located in the GCC Networking
Guide on the CD-ROM.
Print Density Control
At the left side of the MultiPurpose feeder is a wheel that lets you adjust print den-
sity. You can make images darker or lighter. GCC recommends that if you feel that
your printer is producing images that are too dark or light you adjust settings using
the Control Panel. See the chapter on the Control Panel in this manual in the section
on menus "9: Print Darkness."
In extreme circumstances the Control Panel settings may not produce the results you
want. In that case adjust this wheel to get the required level of darkness. Otherwise
we recommend that you do not adjust this control.
1 - 22 • Introduction and Installation
H
L