GCC Technologies Elite XL-20/600 User Manual page 88

Note: The serial port settings in the printer's control panel menus must match the
settings in this dialog box. Check the settings and change them if necessary (see the
section of the CD-ROM that deals with control panel menus). Note that the DTR
setting in the Flow Control submenu corresponds to the Hardware setting shown
above.
• Click OK.
• Close the Ports dialog box.
You will return to the Create Printers dialog box.
3.
In a few seconds you will see the PostScript Printer Setup Window.
• In the Form to Tray section, choose a paper tray and paper size. Your selections
• Select Use Printer Halftoning. Halftoning controls the screen frequency and
4.
You will see the Print Manager window, now showing an icon for the newly
5 - 6 • Using Windows NT 3.51
We recommend the above settings.
Click OK.
should be the usual paper tray and paper size that will be used for print jobs.
These settings become the default settings in the Print dialog box of all applica-
tions that run on this computer. You can override them from the Print dialog
box.
screen angle for your documents. We recommend that you select Use Printer
Halftoning to use the printer's default screen frequency. Note that you can
change the screen frequency by using the Default Screens submenu in the
printer's control panel (see the section of the CD-ROM that deals with control
panel menus).
Click OK.
created printer.