6: Using Windows Nt 4.0; Windows Nt 4.0 Printing Software Overview - GCC Technologies Elite XL-20/600 User Manual

6: Using Windows NT 4.0

Windows NT 4.0 printing software overview

You set up your Windows NT 4.0 computer to use the Elite XL 20ppm by installing
the Elite XL 20ppm software for Windows NT 4.0. This software is on the Elite XL
20ppm CD-ROM.
Windows NT 4.0 uses a Wizard to help you install printer software. A Wizard is a
series of dialog boxes. In each dialog box you make configuration choices then click
the Next button to move to the next dialog box.
This installation guide does not cover connecting to a networked printer or making
your printer available for sharing by others. Details of these operations are contained
on your Windows NT 4.0 CD-ROM.
Important: Part of the software that you need is contained on the
Windows NT 4.0 CD-ROM. You must have the Windows NT 4.0 CD-ROM
to install the software for the Elite XL 20ppm.
To install the printing software, make sure that the printer is switched on and
connected to the computer or network. Also place the Elite XL 20ppm CD-ROM in
your CD-ROM drive. Then:
1.
2.
3.
4.
• Choose My Computer and click the Next button.
6 - 2 • Using Windows NT 4.0
Click on the Start button.
You will see the Start menu. Click on Settings, then click on Printers on the
submenu.
You will see the Printers folder. Double-click the Add Printer icon.
You will see the local/network dialog box.