GCC Technologies Elite XL-20/600 User Manual page 183

If your printer is connected to another port, or Windows is installed on a
drive other than C, change the references. Do not use any Windows print
commands; you must execute this command in DOS.
4. Type exit and press the Return key to return to Windows.
The printer will have printed a page which shows "Max Suggested VM (KB):" This is
the maximum suggested Virtual Memory for the printer in kilobytes. You now need
to enter this figure in the Printers section of Windows Control Panel on every
Windows computer that uses the printer. The way you do this varies between ver-
sions of Windows.
Updating the printer's virtual memory in Windows 3.1
1. Open the Main Window in Program Manager, and double-click on the
Control Panel icon.
2. Double-click on the Printers icon.
3. Click on the Setup button.
4. Click on the Advanced button.
5. Enter the suggested virtual memory value into the Virtual Memory (KB)
box.
6. Click the OK button until you've returned to Program Manager.
7. Repeat steps 1 - 6 on every Windows 3.1 computer that will use the
printer.
Updating the printer's virtual memory in Windows 95
1. Choose Settings from the Start menu, and choose Printers from the
submenu.
2. You will see the Printers window; use the right mouse button to click on
the Elite XL 20ppm icon.
3. You will see a menu; choose Properties from this list.
4. You will see the Properties tabbed dialog box; click on the Device Options
tab.
5. At the top of the dialog box is a section marked Available printer memory
(in KB). Enter the suggested virtual memory into this box.
6. Click OK.
7. Repeat steps 1 - 6 on every Windows 95 computer that will use the printer.
C-9