The Elite Xl 20Ppm Menu System; Do I Need To Change Control Panel Menus - GCC Technologies Elite XL-20/600 User Manual

• To save changes when you change main menu or submenu settings.
• To find out which port is being used for the current print job.
+ and – keys
You use the + and – keys to move through main menu and submenu settings. You
can use these keys only when the printer is off line.

The Elite XL 20ppm menu system

The menu system consists of a number of main menus. Some main menus contain
submenus. Some menus only give you information, while others let you change
settings.
Depending on your choices, some menus may not be available. For instance, the
factory defaults set the PS/PCL Sensing menu to PostScript Only, and you cannot
access the PCL menus. If you changed this menu setting to Auto Switch or PCL Only,
the PCL menus would be accessible.
Note: Items that appear in bold in this section are the factory default settings.
Reminder: Press the Enter key to save a new setting. An asterisk (*) will appear next
to the new setting confirming that your changes have been saved.
The main menu items are:

Do I need to change control panel menus?

The factory default menu settings suit most users. If you have specialized printing or
connection needs, you may find that you need to change these settings.
8 - 6 • The Control Panel
After you make a change to a main menu setting or submenu setting, press the
Enter key to save the new setting. An asterisk (*) will appear in the display
window to the right of the setting to confirm that new setting has been saved.
Press the Enter key when the Elite XL 20ppm is processing a job (when the
Comm LED is flashing). The LCD display window shows the name of the
interface port that is receiving data.
1. Language
2. Print Help Page
3. Print 1 Sample(s)
4. Printer Info
5. Paper Handling
6. Emulations
7. Interfaces
8. Print Info Pages
9. Print Control
10. Energy Save