Emulations - GCC Technologies Elite XL-20/600 User Manual

6. Emulations –
menus contain additional submenus.
Submenu
PS/PCL Sensing: Whether the printer will
automatically switch between PostScript and
PCL emulations, or print only PostScript or
only PCL jobs.
Port Emulations
(7 submenus)
Parallel: Whether the parallel port will
automatically switch between PostScript and
PCL emulations, or print only PostScript or
only PCL jobs.
RS422: Whether the RS422 port will
automatically switch between PostScript and
PCL emulations, or print only PostScript or
only PCL jobs.
LocalTalk: Whether the LocalTalk port will
automatically switch between PostScript and
PCL emulations, or print only PostScript or
only PCL jobs.
EtherTalk: Whether the EtherTalk port will
automatically switch between PostScript and
PCL emulations, or print only PostScript or
only PCL jobs.
Lpd: Whether the Lpd port will automatically
switch between PostScript and PCL emula-
tions, or print only PostScript or only PCL
jobs.
TCP direct: Whether TCP will automatically
switch between PostScript and PCL emula-
tions, or print only PostScript or only PCL
jobs.
NEST: Whether NEST will automatically
switch between PostScript and PCL emula-
tions, or print only PostScript or only PCL
jobs.
8 - 10 • The Control Panel
press the Enter key to access the Emulations submenus. These
Settings
Auto switch, PostScript only,
or PCL only.
Auto switch, PostScript only,
or PCL only.
Auto switch, PostScript only,
or PCL only.
Auto switch, PostScript only,
or PCL only.
Auto switch, PostScript only,
or PCL only.
Auto switch, PostScript only,
or PCL only.
Auto switch, PostScript only,
or PCL only.
Auto switch, PostScript only,
or PCL only.
Notes
To print PCL jobs the factory setting (Post-
Script only) must be changed to either Auto
switch or PCL only. Using Auto switch
takes more printer memory than
PostScript only or PCL only.
The Port Emulations submenu only appears
when PS/PCL sensing is set to Auto switch.
This option will only appear if LPD is
configured.
This option will only appear if TCP is
configured.
This option will only appear if NEST is
configured.