Table of Contents
Advertisement
GENERAL INFORMATION
Semiconductor Sensor "Flexi" Probe Assembly
- Part No. 42200
A replacement filter disc, which is incorporated in the Probe
end cap, is available from Teledyne GMI. Filters should
be checked periodically and where appropriate changed
to ensure a clean sample path. Any filter which has been
contaminated must be replaced. See filter replacement
instructions in Section 5 OPERATOR MAINTENANCE.
Semiconductor Survey "Bellows" Probe Assembly
- Part No. 42444
A replacement Dust Filter disc, which is incorporated in the
Semiconductor Survey "Bellows" Probe, is available from
Teledyne GMI. A Water Filter assembly is available as an
accessory for use with this probe. Filters should be checked
periodically and, where appropriate, changed to ensure a
clean sample path. Any filter which has been contaminated
must be cleaned or replaced. See Filter Replacement in
Section 5 OPERATOR MAINTENANCE.
Probe Handle Assembly - Part No. 13561
A Water or Dust Filter Assembly is available from
Teledyne GMI for use with this probe handle. Either of
the filter assemblies can be attached to the probe handle.
Filters must be checked at frequent intervals and where
appropriate changed to ensure a clean sample path.
Any filter which has been contaminated must be cleaned or
replaced. See Filter Replacement in Section 5 OPERATOR
MAINTENANCE.
2-11
Advertisement
Table of Contents
