Operator Messages / Fault Flags - Teledyne First Responder CG User Handbook Manual

FIRST RESPONDER CG - USER HANDBOOK
Instrument connection points for the three types of probe
are shown in Figure 3-19.
Connection for
Connection for
Probe Sample Line
8-Pin Probe
Connector Plug
Fig. 3-19 Probe Connection

Operator Messages / Fault Flags

Various messages can appear on the LCD screen to indicate
instrument status.
'SAMPLE'
This indicates that the pump is running and the instrument
is sampling.
'OFF'
This indicates that the instrument is about to switch off. This
command can be cancelled by a single press of any button.
'FAULT'
When in TRAC mode (EXT range), this message is displayed
if the Semiconductor Sensor Probe is not connected.
3-20