Platform Control Console - Skyjack SJ85 AJ Operating Manual

Section 3 – Familiarization
1 2
22

3.3-4 Platform control console

This control console is mounted at front
guardrail of the platform. It has the following controls:
Secondary guarding electrical (SGE) reset
1
button - This button, when depressed, shuts off
the audible/visual alarm from the SGE.
Work light switch (if equipped) - This switch
2
turns on work light.
7
Dual fuel switch (if equipped) - This switch
3
selects between gasoline or liquid propane gas.
Engine start/on/off switch - This switch, when
4
held momentarily in start position, starts engine.
Once started, the switch returns to on position.
When in off position, it turns engine off.
Horn pushbutton - This pushbutton sounds an
5
automotive-type horn.
213217AAA
26
3 4 5 6
21 20 19 18 17 16
Figure 09 Platform control console
7 8 9
TM
1

+
+
2
15 14 13 12
Status indicator pilot lights - These lights
6
indicate operational status and errors in any
function in the controls/engine.
A B C
A. Footswitch - This light illuminates when
footswitch is depressed. A 7-second anti-
tiedown feature deactivates footswitch when
operator depresses it for 7 seconds without
activating any function.
B. Chassis tilt - This light illuminates when
the MEWP chassis is at an inclination that
activates the tilt switch. At this inclination,
an audible alarm will sound at the platform.
Refer to Section 6.2
recovery from an inclined position.
C. Overload light - This red light indicates
overload status. Refer to
D. Engine - This light indicates failure in engine
control system.
Control Functions
10
11
D E F
for instructions regarding
Section 3.4-7.
SJ85 AJ