Tire/Wheel Specifications; Maximum Platform Capacities; Floor Loading Pressure - Skyjack SJ85 AJ Operating Manual

Tire/Wheel Specifications

7.6 Tire/Wheel Specifications
Tire Size
Type
Tire Ply Rating
Wheel Nuts Torque

7.7 Maximum Platform Capacities

Total Capacity (High)
Total Capacity (Low)
Maximum Wind
Maximum Side Force
Tilt Cutout Setting

7.8 Floor Loading Pressure

Gross MEWP
Model
SJ85 AJ 16,805
• Gross MEWP Weight = Weight + platform capacity
• Gross MEWP Weight = Weight + platform capacity
• LCP – Locally Concentrated Pressure – is a measure of how hard the MEWP tire tread presses on the area in direct
contact with the fl oor. The fl oor covering (tile, carpet, etc.) must be able to withstand more than the indicated values above.
• OUP – Overall Uniform Pressure – is a measure of the average load the MEWP imparts on the whole surface projected
directly underneath it. The structure of the operating surface (beams, etc.) must be able to withstand more than the
indicated values above.e
• Welder option will add approximately 158.8 kg (350 lb) to total MEWP weight and 79.4 kg (175 lb) to max. wheel load.
NOTE
The LCP or OUP that an individual surface can withstand varies from structure to structure and is generally
determined by the engineer or architect for that particular structure.
SJ85 AJ
Weight
kg lb kg
37,050 7,500
Section 7 – Technical Diagrams & Specifications
SJ85 AJ
0.47 m x 1.05 m (18.7 in x 41.2 in)
SJ85 AJ
Total MEWP Load
Wheel
lb kPa
16,500 1,179
Outrigger R4 18-625
Foam-fi lled
16
373 Nm
340 kg (750 lb)
3 Persons
227 kg (500 lb)
2 Persons
12.5 m/s
400 N
5 degrees x 5 degrees
LCP
psi kPa
171 17
1746AA_ANSI
1747AA_ANSI
OUP
psf
355
1748AA_ANSI
213217AAA
83