Base - Skyjack SJ85 AJ Operating Manual

Section 4 – Pre-operation
3
Fuel leaks
Ensure that there are no fuel leaks.
▪
WARNING
Engine fuels are combustible. Inspect the MEWP
in an open, well-ventilated area away from heaters,
sparks and flames. Always have an approved fire
extinguisher within easy reach.
Ensure fuel tank, hoses and fittings show
▪
no visible damage and no evidence of fuel
leakage.

4.2-7 Base

Turret transportation lock
1
Ensure turret transportation lock is unlocked,
▪
there are no loose or missing parts and there
is no visible damage.
Drive axles
Ensure front drive axle
▪
are properly secured, there are no loose
3
or missing parts, all fittings and hoses are
properly tightened and there is no evidence of
hydraulic leakage.
Tie rod
4
Ensure there are no loose or missing parts,
▪
tie rod end studs are locked and there is no
visible damage.
213217AAA
44
and rear drive axle
2
Visual & Daily Maintenance Inspections
4
1
Oscillating cylinder assembly
5
Ensure oscillating cylinder assembly is
▪
properly secured and there are no visible
gaps, loose or missing parts, all fittings and
hoses are properly tightened and there is no
evidence of hydraulic leakage.
NOTE
Oscillating axle is locked when MEWP is in low
speed (refer to Figure
5
5
2
37).
SJ85 AJ