Visual & Daily Maintenance Inspections
3
1
4.2-6 Control compartment
Ensure all compartment latches are secure and in
proper working order.
Base control console
1
Ensure all switches are returned to their
▪
neutral positions.
Ensure there are no loose or missing parts and
▪
there is no visible damage.
Hydraulic tank
2
Ensure hydraulic filler cap is secure.
▪
Ensure tank shows no visible damage and no
▪
evidence of hydraulic leakage.
Hydraulic oil level
3
Be sure that the boom is in the stowed
▪
position, and then visually inspect the sight
gauge located on the side of the hydraulic oil
tank.
The hydraulic oil level should be between the
▪
minimum and maximum marks on the sight
glass. Add oil as needed. Refer to service
manual for recommended oil type.
Hydraulic return filter
4
Ensure filter element is secure.
▪
Ensure there are no signs of leakage or visible
▪
damage.
High pressure filter
5
Ensure housing is secure and shows no visible
▪
damage or leakage.
SJ85 AJ
2
4
6
7
Brake manifold
6
Ensure all fittings and hoses are properly
▪
tightened and there is no evidence of hydraulic
leakage.
Ensure there are no loose wires or missing
▪
fasteners.
Main manifold
7
Ensure all fittings and hoses are properly
▪
tightened and there is no evidence of hydraulic
leakage.
Ensure there are no loose wires or missing
▪
fasteners.
Emergency power unit
8
Ensure there are no loose or missing parts and
▪
there is no visible damage.
Ensure there are no loose wires or missing
▪
fasteners.
Ensure all fittings and hoses are properly
▪
tightened and there is no evidence of hydraulic
leakage.
Fuel tank
9
IMPORTANT
Before using your MEWP ensure there is enough
fuel for expected use.
Ensure fuel filler cap is secure.
▪
Ensure tank shows no visible damage and no
▪
evidence of fuel leakage.
Section 4 – Pre-operation
8
5
9
213217AAA
43