No.
Diameter Display
8
9
Diameter Tolerance
10
Length Setting - Edit
11
12
2.5
Vision Job > Test
Recognition tests for Vision Job, Position Tool, Presence Tool, Distance Tool, Angle Tool and Diameter
Tool can be performed.
Item
Live/Shoot Mode
Tap the Confirm button after all tests are complete.
Doosan Robotics Reference Manual v1.5
Item
the circle between circle A and B is identified, and its diameter and
center point positions are displayed.
Displays the diameter of the measured circle in the edit window.
(after #7)
Circle Display
Displays the measured circle on the image.
(after #7)
Configures the length threshold from the reference length value.
If a value exceeds the Test tolerance range, the inspection result
Window
Press the Apply button to apply the setting.
Apply
Applies Vision Job settings.
Cancel
Cancels Vision Job Tool settings.
Displays the image from the Live/Shoot mode, and the button
changes to
gray.
The captured image is displayed beneath the Live/Shoot button.
If the measurement is successful, the red circle (
Name changes to blue (
outputs 0.
Description
).
114
Description
) next to the