Doosan M0609 Reference Manual page 107

No. Item
1 Add Distance Tool
2 Edit
3 Delete
4 Move Teaching Area
5 Adjust Teaching Area Size
Adjust Teaching Area Size
6
(circular arrow)
7 Edit Job Name
Select Directions of Line
8
(A, B)
9 Calculate
10 Distance Display
11 Distance Image Display
Adds a Distance Tool to the Vision Tool List.
A setting window of the job selected from the Vision Tool List is
displayed.
The selected job from the Vision Job List is deleted.
Press and hold the arrow to move the teaching area.
Press and hold the arrow to adjust the teaching area size.
 Adjust the area to allow one edge to be captured in it.
Press and hold the arrow to rotate the teaching area.
A virtual keyboard is displayed, and the job name can be edited.
Press the Apply button to apply the setting.
Select the directions for A > B and B >A.
 The direction is immediately applied when the button is
pressed.
 [AB] measurement refers to the length of the line connecting
the center of line A to line B or an extension line of line B.
Creates a line that connects the center position of lines A and B
when lines exist in the two teaching areas (A, B).
The direction is immediately applied when the button is pressed.
Enter the pixel value allowed within the detected area in the edit
window. Values exceeding the value range entered are not
detected.
Displays the distance between lines detected in two teaching
areas in the edit window.
107
Description