Removal of motor mount from motor
Preparation
Note! Switch off the wheelchair via remote control
Instructions
Note! Suitable work area required!
• Follow the illustrated instructions for removing the motor
mount from the motor.
• Rebuild the wheelchair in reverse order once completed.
• In order to complete this, you must first remove the motor
from the wheelchair base.
Fig. 6.2.12
1. Unscrew and remove 6 (A) bolts
Tightening torque for (A) bolt is 13Nm.
2. Remove motor mount (B) from main motor
20
Tools used
6
1
A
2
B
Fig. 6.2.14
Q700M Rev.A