Antenna Interfaces; Main/Rx-Diversity Antenna Interfaces; Pin Definition - Quectel EG91 Series Hardware Design
Lte standard module
Hide thumbs
Also See for EG91 Series:
- Hardware design (98 pages) ,
- Hardware design (94 pages) ,
- Hardware design (109 pages)
Table of Contents
Advertisement
5
Antenna Interfaces
EG91 series module antenna interfaces include a main antenna interface and an Rx-diversity antenna
interface which is used to resist the fall of signals caused by high speed movement and multipath effect,
and a GNSS antenna interface which is only supported on EG91-AUX/-EX/-NA/-NAL/-NAX/-NAXD/
-NAXDL/-NAL/-VX. The impedance of the antenna port is 50 Ω.
5.1. Main/Rx-diversity Antenna Interfaces
5.1.1. Pin Definition
The pin definition of main antenna and Rx-diversity antenna interfaces is shown below.
Table 23: Pin Definition of RF Antenna
Pin Name
ANT_MAIN
ANT_DIV
(EG91-E)
ANT_DIV
(EG91-EX/-NA/-NAL/
-NAX/-NAXD/-NAXDL/
-VX)
NOTE
1.
Pin 49 is defined as ANT_GNSS on EG91-AUX/-EX/-NA/-NAL/-NAX/-NAXD/-NAXDL/-VX, while it is
defined as ANT_DIV on EG91-E.
2.
Pin 56 is RESERVED on EG91-E, while it is defined as ANT_DIV on EG91-EX/-NA/-NAL/-NAX/
-NAXD/-NAXDL/-VX. Rx-diversity antenna is not supported on EG91-AUX.
EG91_Series_Hardware_Design
Pin No.
I/O
Description
60
AIO
Main antenna Interface
49
AI
Diversity antenna interface
Diversity receive antenna
56
AI
interface
LTE Standard Module Series
Comment
50 Ω impedance
50 Ω impedance.
If unused, keep it open.
50 Ω impedance.
If unused, keep it open.
60 / 105
Advertisement
Table of Contents
