Front Panel Features Of The 10 X 2.5-Inch Hard Drives Or Ssds System - Dell PowerEdge R430 Owner's Manual

Front panel features of the 10 x 2.5-inch hard drives or SSDs
system
Figure 5. Front panel features of the 10 x 2.5-inch hard drives or SSDs system
1. USB management port/iDRAC managed USB port
3. Power button
5. System identification button
Table 4. Front panel features of the 10 x 2.5-inch hard drives or SSDs system (continued)
Item Indicator, Button, or
Connector
1 USB management port/iDRAC
managed USB port
2 Diagnostic indicators
3 Power button
4 NMI button
5 System identification button
6 Hard drives
14 Dell PowerEdge R430 system overview
2. Diagnostic indicators
4. NMI button
6. Hard drives
Icon Description
The USB management port is USB 2.0 compliant. Enables you
to connect USB devices to the system or provides access
to the iDRAC Direct features. For more information, see the
Integrated Dell Remote Access Controller User's Guide at
Dell.com/idracmanuals.
The diagnostic indicators light up to display error status.
Indicates if the system is powered on or off. Press the power
button to manually power on or off the system.
NOTE:
ACPI-compliant operating system.
Press the Non-Maskable Interrupt (NMI) button to
troubleshoot software application and device driver errors
when running certain operating systems. Use the end of a
paper clip to press the NMI button.
NOTE:
qualified support personnel or by the operating system
documentation.
NOTE:
and hold the System ID button for more than five
seconds to enter the BIOS progress mode.
NOTE:
setup page by pressing F2 during system boot), press and
hold the System ID button for more than 15 seconds.
Up to 10 x 2.5 inch hard drives/SSDs.
Press the power button to gracefully shut down an
Use the NMI button only if directed to do so by
If the server stops responding during POST, press
To reset the iDRAC (if not disabled on the iDRAC