Installing The Expansion Card Riser - Dell PowerEdge R430 Owner's Manual

5. slot on the chassis
Next steps
1. Install the expansion card riser.
Related references
Safety instructions on page 71
Related tasks
Before working inside your system

Installing the expansion card riser

After working inside your system
Installing the expansion card riser
Prerequisites
1. Install the expansion card into the expansion card riser.
Steps
1. Align the following:
a. Guide on the expansion-card riser with the guide pin on the system board.
b. Expansion card riser latch with the slot on the chassis.
2. Lower the expansion card riser until the expansion card riser is firmly seated in the connector on the system board.
3. Close the expansion card riser latch.
Figure 52. Installing the expansion card riser
1. expansion card riser
3. guide pin on the system board
5. slot on the chassis
Related references
Safety instructions on page 71
114 Installing and removing system components
on page 72
on page 114
on page 72
6. expansion card latch
2. guide on the expansion card riser
4. riser connector on the system board
6. expansion card latch