Installing The Optional Internal Dual Sd Module - Dell PowerEdge R430 Owner's Manual

Figure 61. Removing the internal dual SD module (IDSDM)
a. IDSDM
b. pull tab
c. IDSDM connector
Next steps
1. Install the IDSDM.
2. If removed, install the SD cards.
Related references
Safety instructions on page 71
Related tasks
Before working inside your system
Removing an internal SD card

Installing the optional internal dual SD module

Installing an internal SD card
After working inside your system
Installing the optional internal dual SD module
Steps
1. Locate the internal dual SD module (IDSDM) connector on the system board. To locate the IDSDM connector, see the
System board connectors section.
2. Align the IDSDM with the connector on the system board.
3. Push the IDSDM until it is firmly seated on the system board.
124 Installing and removing system components
on page 72
on page 121
on page 124
on page 122
on page 72