Replacing The Optional Internal Usb Memory Key - Dell PowerEdge R430 Owner's Manual

Replacing the optional internal USB memory key

Steps
1. Locate the USB port or USB memory key on the system board.
To locate the USB port, see the System board connectors section.
2. If installed, remove the USB memory key from the USB port.
Figure 49. Removing the internal USB memory key
a. USB memory key
b. USB port
3. Insert the replacement USB memory key into the USB port.
Figure 50. Installing the internal USB memory key
a. USB memory key
b. USB port
Next steps
1. While booting, press F2 to enter System Setup and verify that the system detects the USB memory key.
Related references
Safety instructions on page 71
System board connectors
Related tasks
Before working inside your system
After working inside your system
on page 171
on page 72
on page 72
Installing and removing system components 111