Dell PowerEdge R430 Owner's Manual page 66

Option Description
Enables the Monitor/Mwait instructions in the processor. This option is set to Enabled for all system
Monitor/Mwait
profiles, except Custom by default.
Related references
System Profile Settings on page 64
Related tasks
Viewing System Profile Settings
Miscellaneous Settings
You can use the Miscellaneous Settings screen to perform specific functions such as updating the asset tag and changing the
system date and time.
Related references
System BIOS on page 43
Related tasks
Miscellaneous Settings details
Viewing Miscellaneous Settings
Viewing Miscellaneous Settings
To view the Miscellaneous Settings screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
NOTE:
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Miscellaneous Settings.
Related references
Miscellaneous Settings on page 66
Related tasks
Miscellaneous Settings details
66 Pre-operating system management applications
This option can be disabled only if the C States option in the Custom mode is set to
NOTE:
disabled.
When C States is set to Enabled in the Custom mode, changing the Monitor/Mwait setting
NOTE:
does not impact the system power or performance.
on page 64
on page 67
on page 66
on page 67