Lcd Panel - Dell PowerEdge R430 Owner's Manual

Table 4. Front panel features of the 10 x 2.5-inch hard drives or SSDs system
Item Indicator, Button, or
Connector

LCD panel

The LCD panel of your system provides system information, status, and error messages to indicate if the system is functioning
correctly or if the system needs attention. For more information about error messages, see the Dell Event and Error Messages
Reference Guide at Dell.com/openmanagemanuals >OpenManage software.
● The LCD backlight turns blue during normal operating conditions.
● When the system needs attention, the LCD turns amber, and displays an error code followed by descriptive text.
If the system is connected to a power source and an error is detected, the LCD turns amber regardless of
NOTE:
whether the system is turned on or off.
● The LCD backlight is turned off when the system is in standby mode and can be turned on by pressing either the Select,
Left, or Right button on the LCD panel.
● The LCD backlight remains off if LCD messaging is turned off using the iDRAC utility, the LCD panel, or other tools.
Figure 6. LCD panel features
Table 5. LCD panel features
Item Button
1 Left
2 Select
3 Right
Related references
Setup menu on page 16
View menu on page 16
Related tasks
Viewing Home screen on page 16
Icon Description
Enable you to install drives that are supported on your
system. For more information about drives, see the Technical
specifications section.
Description
Moves the cursor back in one-step increments.
Selects the menu item highlighted by the cursor.
Moves the cursor forward in one-step increments.
During message scrolling:
● Press and hold the button to increase scrolling speed.
● Release the button to stop.
The display stops scrolling when the button is released. After 45
NOTE:
seconds of inactivity, the display starts scrolling.
Dell PowerEdge R430 system overview 15