Before First Use - Hanseatic HBCO7010PA1 User Manual

back into the built-in cabinet so that the
connections and earthing screw for the
hob can still be easily reached.
2. Insert the hob plugs into the sockets on
the top of the cooker. Do not use any
force. The plugs are coded. Polarity rever-
sal is therefore not possible.
3. Insert the mains plug into a properly in-
stalled socket
4. Keep the oven centred and push it fully
into the built-in cabinet.
The mains connection must not be kinked,
pinched or otherwise damaged.
5. Screw the oven to the built-in cabinet with
the two screws which have been supplied.
Installing the oven

Before first use

1. Remove all transport safety devices (card-
board strips, etc.) and all adhesive strips
from the oven.
2. Turn all the cooker's dials to "0".
3. Switch on the fuses for the cooker's elec-
trical circuit.
4. Thoroughly clean the oven before first
use.
Basic cleaning
Clean the oven before using it for the first time
in order to properly remove all production and
transport residues. This not only helps protect
your health but also ensures delicious cakes
and roasts.
1. Leave the dripping pan, baking tray and
oven rack in the cooking compartment.
Switch the oven on and let it run for ap-
prox. 30 minutes at 250°C.
It is normal for a slight odour to develop. If
necessary, open the kitchen window.
2. After switching off the oven, open the oven
door and allow the oven to cool complete-
ly.
3. Remove the dripping pan, baking tray and
oven rack and clean and rinse off all piec-
es as well as the cooking compartment.
Then wipe everything dry.
4. All further instructions on how to operate
the oven can be found from page EN-13.
Page EN-39