Replacing Oven Lightbulbs - Hanseatic HBCO7010PA1 User Manual

Page EN-30 Cleaning the oven
Putting the oven door back on its hinges
1. Hold the oven door at an angle using both
hands.
2. Hook the hinges into the holes in the side
panels.
3. Open the oven door completely.
4. Fold the clips (x) on both sides all the way
back.
5. Close the door carefully. The door must
sit flush when closed. If the door does not
sit flush when closed or if there is a crack-
ing sound when closing it, the door is not
hung properly.
In such a case, correct the hinges and
clips until the door opens and closes
smoothly.

Replacing oven lightbulbs

WARNING
Risk of electric shock!
Improper replacing of the oven light
bulb may cause electric shock which
can lead to serious injury or even death.
■ Before replacing the oven bulb, be
sure to switch off the circuit breaker
or unscrew fuses.
Risk of burns!
The cooking compartment can remain
hot a long time after it has been swit-
ched off. As a result, there is a risk of
being burnt when touching the cooking
compartment walls or heating unit.
■ Only change the oven light bulb when
the oven has cooled off completely.
For the oven lighting, you need a heat-resist-
ant oven bulb: type 220–240 V~, 25 W, G9,
T300°C.
1. Switch off the circuit breakers or unscrew
fuses.
2. Place a soft cloth in the cooled cooking
compartment in the event that the glass
cover falls or the bulb falls off.
3. Unscrew the glass cover anticlockwise
and remove it.
4. Carefully pull the defective bulb out of the
socket and replace it with a new one of the
same type.
5. Insert the glass cover back into the open-
ing and screw it back on clockwise.
6. Remove the cloth from the cooking com-
partment and switch it on again.
7. Set the clock.
G9
25 W