The Timer; Setting The Time; Setting The Start Time - Hanseatic HBCO7010PA1 User Manual

The timer

Setting the time

When starting up the appliance for the first
time or after a power failure, the display will
show . The time must be set.
0: 0 0
88:88
c
888
(19) (18)
1. Tap the sensor (19).
will flash on the hour indicator.
0
2. Turn the controller (15) until the display
(18) shows the current hour (
3. To save the setting, tap the
sor (19) again.
will flash on the minute indicator.
00
4. Turn the controller (15) until the display
(18) shows the current minute (
5. To save the setting, tap the
sor (19).
The time is set.
If you want to change the time already
set, for example, changing from daylight
savings time to standard time, proceed in the
same manner.

Setting the start time

If you don't want the cooking process to be
started immediately, but at a certain time, you
can set a start time, with the exception of:
Functions
Requirement: The time is set.
(15)
(19)
1. Tap the
- ).
0 23
The indicator showing the current hour
sen-
will flash.
2. Turn the controller (15) until the dis-
play (18) shows the desired start hour
(
0
- ).
0 59
3. To save the setting, tap the
sen-
sor (19) again.
The indicator showing the current minute
will flash.
4. Turn the controller (15) until the dis-
play (18) shows the desired start minute
(
0
5. Do not tap the hour sensor again, but in-
stead
– select the desired function, temperature
– start the cooking process.
The hourglass symbol
tom right of the display to indicate that you
have set a start time. When the start time is
reached, you will hear a signal tone and the
cooking process will start.
The timer
and .
88:88
c
888
(18)
sensor (19).
- ).
23
- ).
59
and cooking time (see "Starting the cook-
ing process" on page EN-23) and
appears at the bot-
Page EN-31
(15)
sen-