Safety Of The Personnel Operatıng The Machine; Personal Protectıve Equıpments; Procedure For Isolation Of Machine - YILMAZ DC 550 Operator's Manual

2. SAFETY
2.4 Safety Of The Personnel Operating The Machine
2.4.1 Operator of the machine should wear appropriate clothing fitting on him / her. Loose fitting clothes
or any sort of jewelry that might be pulled by the moving parts of the machine should not be used.
2.4.2 The operator should not use the machine in case of lose of focusing on the work and discomfort
of body which will lead to lose of reflex and scattering of attention.
2.5 Personal Protective Equipments
Using protective equipments mentioned below are advised:
2.5.1 Heavy type hand gloves to protect against cutting, puncturing or piercing during transportation of
materials,
2.5.2 Ear protectors / plugs against extreme noise,
2.5.3 Glasses against particles that might be spread as dust, filings, etc,
2.5.4 Heavy duty shoes when carrying materials with certain weights and dimensions,
2.5.5 Use of mask when using cooling liquid

2.6 Procedure For Isolation Of Machine

2.6.1 Before performing any maintenance, repair, cleaning or such works the electricity of the machine
should be cut off from the main schalter. Turn off the pneumatic air supply. Release the
pressurized air that remains in the machines pneumatic circuit.
2.6.2 Maintenance, repair, cleaning and such works should be performed by personnel who have taken
all the precautions listed above. If it is a simple work it can be the operator to perform it after
taking these precautions.
2.6.3 If the machine is not in use turn off the main schalter and pneumatic air.
ET
76