YILMAZ DC 550 Operator's Manual page 100

7. OPERATION
7.8.2.3 Making Changes to the Recipe
between the lines on the recipe. The line at the top shows the line in the active state.
Click on the place you want to change, then enter the new value and press enter. For example, if length
is desired as 2206, it is done as follows. ( FIGURE – 34 )
If you want to make more detailed changes, click the arrow button at the rightmost of the
relevant line and the following page opens. ( FIGURE – 35 ) The changes made here are automatically
saved and when the process is finished, the close page button is pressed to
With the help of the arrow keys you can switch
FIGURE – 34
FIGURE – 35
99
exit this page.