Pepperl+Fuchs PGV -F213-B16-1.5M Series Manual page 62

PGV*-F213-B16-1.5M-*
Appendix
6.4 Code Cards for Termination Resistor
Switches the termination resistor on or off and saves the settings.
Note
To save the change to the termination resistor, the "Store Termination" code card must be used.
The read head ends the parameterization mode.
The "Default" and "Cancle" code cards have no effect on changes to the termination resistor.
Figure 6.12
Figure 6.13
Figure 6.14
62
The "Store Termination" code card saves the changes made to the termination resistor
and ends the parameterization mode.
The Termination ON code card activates the termination resistor on the bus.
The Termination OFF code card deactivates the termination resistor on the bus.
Store
Termination
Termination ON
Termination OFF