Managing The Rhythm Record - Innomed Medical HS112 C-1 User Manual

Printing properties (speed, sensitivity, filter status) correspond to the current curve display
settings.
Pressing the OK or

11.4.2. Managing the rhythm record

Pressing the "RITM" button of the selected record, displays the stored rhythm curve.
It is possible to set the curve sensitivity of the stored rhythm curve. The 5 mm/s speed cannot
be modified.
The length of the rhythm record:
 corresponds to the settings under Setup/Store if the record was stored with the storage
(STORE) program
 is set to 16 second if the record was created with the analysis/diagnosis (DIAG)
program
Since the length of the record may exceed the width of the display, the record can be scrolled
by swiping the screen horizontally. The beginning and end time of the current section is
shown at the bottom of the screen. If the length of the record is at least 1 minute, the device
also calculates statistics. The statistics can be browsed by horizontal swiping. For details see
the section describing the arrhythmia program.
R-6730-EN02-E
HS112 C-1 User Manual
button returns to the Catalogue.
45/73