Operating Modes; Lead Groups; Heart Frequency Measuremen; Pacemaker Pulse Detection - Innomed Medical HS112 C-1 User Manual

18.5. Operating modes

Monitoring, display
Manual printing
Automatic printing:
Record storage (STORE)
Analysis and diagnosis creation
(DGN)
Arrhythmia analysis (ARTM)

18.6. Lead groups

Standard:
Cabrera:
18.7. Heart frequency measurement
Measurement range
Accuracy

18.8. Pacemaker pulse detection

When the device examines a patient with a pacemaker, recognizes the pacemaker signal within certain ranges according to
the technical parameters and graphically displays on the record. In this case diagnosis is not created, because the pacemaker
pulse may interfere the diagnosis program.
Warning!
There is only analysis creation which the pace impulse does not interfere, but due to the morphological differences there
may be inaccuracies in the numerical data.

18.9. ECG amplifier

Input signal range
Frequency response
Voltage measurement relative error
in the 0,5 - 10 mV range
Sensitivity
Noise referred to the input
Input impedance (informative)
CMRR
DC tolerance
Pacemaker tolerance
Pacemaker detection
60/73
HS112 C-1 User Manual
3, 6 or 12-channel monitoring + rhythm channel
Manual printing from any lead groups on 3, 6 or 12 channels
Adjustable length automatic printing from the 12 standard ECG leads in 2x6
or 4x3 channel groups.
Automatic recording and storage from 12 leads. Rhythm curve may be stored
in pre-programmed mode.
Automatic 12-channel recording with analysis and diagnosis. Raw curve,
rhythm curve may be stored in pre-programmed mode. Data, marked average
curved appearance on the display and printer.
Arrhythmia event storage, trends, statistics.
Result appearance on the printer and display.
3 channels: I-III; aVR-aVF; V1-V3; V4-V6
6 channels: I – aVF; V1 – V6
12 channels: I...V6
3 channels: aVL I -aVR; II aVF III; V1- V3; V4-V6
6 channels: aVL I –aVR II aVF III; V1 V2 V3 V4 V5 V6
12 channels: aV...V6
30 – 300 BPM
1 BPM or 2%
 10 mV
0,05 Hz...150 Hz +0,-3 dB
2.5, 5, 10, 20 mm/mV Auto
max. 20 Vpp
min. 20 MOhm
min. 100 dB
min.  320 mV DC
max. 700mV/2ms
min.2 mV/0,5 ms max. 700mV/2ms
R-6730-EN02-E
3%