Sensitivity Selection; Sweep Speed Selection - Innomed Medical HS112 C-1 User Manual

8.7. Sensitivity se
Sensitivity can be selected using the Sensitivity can be selected using the
 1/4 cm/mV; 1/2 cm/mV; 1 cm/mV; 2 1/4 cm/mV; 1/2 cm/mV; 1 cm/mV; 2 cm/mV
The sensitivity can also be set using the screen, as described in the following: The sensitivity can also be set using the screen, as described in the following: The sensitivity can also be set using the screen, as described in the following:
Touch the middle of the screen with two fingers (most conveniently the thumb and index Touch the middle of the screen with two fingers (most conveniently the thumb and index Touch the middle of the screen with two fingers (most conveniently the thumb and index
finger) placed one above the other. Pull the fingers apart in a vertical direction starting from finger) placed one above the other. Pull the fingers apart in a vertical direction starting from finger) placed one above the other. Pull the fingers apart in a vertical direction starting from
the middle of the screen to increase the sensitivity. Place the two fing the middle of the screen to increase the sensitivity. Place the two fing
bottom edges of the screen and bring them closer together to decrease the sensitivity. bottom edges of the screen and bring them closer together to decrease the
The set value is displayed in cm/mV in the bottom right corner of the display and, during The set value is displayed in cm/mV in the bottom right corner of the display and, during The set value is displayed in cm/mV in the bottom right corner of the display and, during
printing, in the header on the printout. printing, in the header on the printout.
Sensitivity selection during printing is not allowed. selection during printing is not allowed.
8.8. Sweep speed

Sweep speed selection

Sweep speed can be selected using the Sweep speed can be selected using the
 5 mm/s; 10 mm/s; 25 mm/s;
The sweep speed can also be set directly on the screen, as described in the following: The sweep speed can also be set directly on the screen, as described in the foll The sweep speed can also be set directly on the screen, as described in the foll
Touch the middle of the screen with two fingers placed next to each other (most conveniently Touch the middle of the screen with two fingers placed next to each other (most conveniently Touch the middle of the screen with two fingers placed next to each other (most conveniently
the thumb and index finger), and pull the fingers apart to increase sweep speed. To decrease the thumb and index finger), and pull the fingers apart to increase sweep speed. To decrease the thumb and index finger), and pull the fingers apart to increase sweep speed. To decrease
sweep speed, place the two fingers on the left and right sweep speed, place the two fingers on the left and right edges of the screen and bring them
closer together.
Sweep speed selection is not allowed during printing. Sweep speed selection is not allowed during printing.
24/73
HS112 C-1 User Manual
selection
button. The possible values are:
button. The possible values are:
mm/s; 50 mm/s
ers on the top and
sensitivity.
are:
edges of the screen and bring them
R-6730-EN02-E