Shutting Down The Implement; Disconnecting The Mower From The Tractor - RHINO FC-0110 Operator's Manual

OPERATION

10.7 Shutting Down the Implement

To shut down attached mower head, first bring the
tractor to a complete stop. Decrease engine RPM to
idle then disengage cutterhead. The mower head will
come to a complete stop within a suitable amount of
time. Do not engage or disengage the cutterheads at a
high RPM unless there is an emergency situation.
Park the tractor on a level surface, place the
transmission in park or neutral and apply the parking
brake, lower the attached implement to the ground,
shut down the engine, remove the key, and wait for all
motion to come to a complete stop before exiting the
tractor. OPS-U- 0016 str

11.DISCONNECTING THE MOWER FROM THE TRACTOR

Before disconnecting the mower, the PTO must be
disengaged and blade rotation at a complete stop.
Move the mower to a level storage location and lower
it to the ground. If the mower is not resting securely
on the ground, block the mower up securely before
attempting to disconnect it from the tractor.
Use extreme care to keep feet and hands from under
the mower and clear of any pinch points caused by
the tractor hitch arms and mower pins.
OPS-R-
0030_A
TR308 04/21 Operation Section 4-40
@ 2021 Alamo Group Inc.