•
Lift Type-Ensure the tailwheel beam position
support bolts are properly installed and tight-
ened.
•
Pull and Semi-Mount Type-Ensure that the
tailwheel ratchet or hydraulic cylinder is
installed and retained correctly to provide the
desired cutting height.
•
Inspect all bolts and screws and tighten to the
recommended torque. OPS-R-0039_N str
•
Ensure the tractor PTO master shield and the
mower slip clutch shield are in place, low-
ered, and in good condition.
•
Ensure the driveline integral shield is in good
condition and rotates freely.
•
Ensure the driveline slip clutch (if equipped)
is properly adjusted. OPS-R-0039_O str
•
Perform scheduled lubrication as specified in
the maintenance section.
•
Inspect each gearbox oil level using dipstick
level indicator and replenish if needed. A low
oil level is a warning sign that the gearbox
may be cracked or its seal is damaged and
needs to be replaced.
•
Ensure all gearbox vents are in place and free
from clogs. OPS-R-0011_S str
TR308 04/21
@ 2021 Alamo Group Inc.
OPERATION
Operation Section 4-22