RHINO FC-0110 Operator's Manual page 79

• Perform scheduled lubrication as detailed in
the maintenance section.
• Ensure all decals are in place and legible.
• Ensure the driveline is securely attached to
tractor. Make sure the driveline yoke locking
collar is securely seated in the grooves of the
PTO shaft by pushing and pulling the yoke
several times.
• Lift Type-Inspect that the 3-point hitch pins
are the proper size, correctly installed, and
secured to the tractor lift arms with retaining
pins inserted.
• Pull Type-Inspect that the hitch bolt is the cor-
rect size, that washers are inserted between
the drawbar and hitch clevis, and the locknut
is securely tightened. OPS-R-0008_D str
• Ensure deflectors and/or chainguards are in
position and not damaged. Replace worn,
broken, and missing pieces. OPS-R-0038_F
str
All Safety Shields, Guards and Safety devices including (but not
limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox
Shields, PTO integral shields, and Retractable Door Shields should
be used and maintained in good working condition. All safety
devices should be inspected carefully at least daily for missing or
broken components. Missing, broken, or worn items must be
replaced at once to reduce the possibility of injury or death from
thrown objects, entanglement, or blade contact. (SGM-3str)
TR308 04/21
@ 2021 Alamo Group Inc.
OPERATION
Operation Section 4-21